{"product_id":"geekvape-aegis-hero-5-empty-replacement-pod","title":"Geekvape Aegis Hero 5 Empty Replacement Pod","description":"\u003cp\u003eThe \u003cstrong\u003eGeekvape Aegis Hero 5 Empty Replacement Pod\u003c\/strong\u003e is a genuine refillable cartridge designed for the \u003ca href=\"\/products\/geekvape-aegis-hero-5-pod-vape-kit\" target=\"_self\"\u003eGeekvape Aegis Hero 5 Pod Vape Kit\u003c\/a\u003e. It features a UK-compliant 2ml e-liquid capacity, an accessible top-filling system and adjustable top airflow for mouth-to-lung, restricted direct-to-lung and direct-to-lung vaping.\u003c\/p\u003e\n\n\u003cp\u003eThis empty pod uses replaceable \u003ca href=\"\/collections\/geekvape-coils\" target=\"_self\"\u003eGeekvape B Series coils\u003c\/a\u003e, allowing you to change the coil while continuing to use the same cartridge. Compatible resistances range from 0.2Ω for higher-powered DTL vaping to 1.2Ω for a tighter, lower-powered MTL inhale.\u003c\/p\u003e\n\n\u003cp\u003eThe transparent pod body makes it easy to monitor the remaining e-liquid, while its magnetic connection keeps the cartridge securely attached to the Hero 5 device. Coils are not included and must be purchased separately.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures of the Geekvape Aegis Hero 5 Replacement Pod\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003eGenuine Geekvape replacement cartridge\u003c\/li\u003e \u003cli\u003eDesigned for the Geekvape Aegis Hero 5 Pod Kit\u003c\/li\u003e \u003cli\u003eUK-compliant 2ml e-liquid capacity\u003c\/li\u003e \u003cli\u003eCompatible with replaceable Geekvape B Series coils\u003c\/li\u003e \u003cli\u003eSupports 0.2Ω, 0.3Ω, 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω coils\u003c\/li\u003e \u003cli\u003eSuitable for MTL, RDL and DTL vaping\u003c\/li\u003e \u003cli\u003eConvenient top-filling system\u003c\/li\u003e \u003cli\u003eAdjustable top airflow control\u003c\/li\u003e \u003cli\u003eTop airflow helps reduce leaking through the pod base\u003c\/li\u003e \u003cli\u003eTransparent PCTG cartridge body\u003c\/li\u003e \u003cli\u003eSecure magnetic connection\u003c\/li\u003e \u003cli\u003eReplaceable push-fit coil system\u003c\/li\u003e \u003cli\u003eAvailable in Iron Black and Pure White\u003c\/li\u003e \u003cli\u003eOne empty replacement pod per pack\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch2\u003eGeekvape Aegis Hero 5 Pod Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThis replacement pod is designed for:\u003c\/p\u003e\n\n\u003cul\u003e \u003cli\u003e\u003ca href=\"\/products\/geekvape-aegis-hero-5-pod-vape-kit\" target=\"_self\"\u003eGeekvape Aegis Hero 5 Pod Vape Kit\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003eIt should not be purchased for other Geekvape Aegis, Boost, Wenax or Sonder devices unless Geekvape specifically confirms compatibility with the exact cartridge.\u003c\/p\u003e\n\n\u003cp\u003eCheck the model name printed on your device before ordering. Although several Geekvape devices use B Series coils, this does not mean they all use the same replacement pod.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible Geekvape B Series Coils\u003c\/h2\u003e\n\n\u003cp\u003eThe Aegis Hero 5 pod uses removable push-fit B Series coils. The selected resistance determines the recommended wattage, e-liquid type, vapour production and inhaling style.\u003c\/p\u003e\n\n\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eCoil resistance\u003c\/th\u003e \u003cth\u003eRecommended wattage\u003c\/th\u003e \u003cth\u003eVaping style\u003c\/th\u003e \u003cth\u003eSuggested e-liquid\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e0.2Ω B Series Boost\u003c\/td\u003e \u003ctd\u003e50–58W\u003c\/td\u003e \u003ctd\u003eDTL\u003c\/td\u003e \u003ctd\u003eLow-strength high-VG e-liquid\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e0.3Ω B Series Boost\u003c\/td\u003e \u003ctd\u003e30–38W\u003c\/td\u003e \u003ctd\u003eDTL\u003c\/td\u003e \u003ctd\u003eLow-strength high-VG e-liquid\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e0.4Ω B Series Boost\u003c\/td\u003e \u003ctd\u003e25–35W\u003c\/td\u003e \u003ctd\u003eRDL\u003c\/td\u003e \u003ctd\u003eLower-strength 50\/50 or high-VG e-liquid\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e0.6Ω B Series Boost\u003c\/td\u003e \u003ctd\u003e15–25W\u003c\/td\u003e \u003ctd\u003eRDL or loose MTL\u003c\/td\u003e \u003ctd\u003e50\/50 e-liquid or lower-strength nic salt\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e0.8Ω B Series\u003c\/td\u003e \u003ctd\u003e12–16W\u003c\/td\u003e \u003ctd\u003eMTL\u003c\/td\u003e \u003ctd\u003e50\/50 e-liquid or nic salt\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1.2Ω B Series\u003c\/td\u003e \u003ctd\u003e8–12W\u003c\/td\u003e \u003ctd\u003eTight MTL\u003c\/td\u003e \u003ctd\u003e50\/50 e-liquid or nic salt\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\n\n\u003cp\u003eThe Aegis Hero 5 has a maximum output of 50W. Although the 0.2Ω coil is marked with a 50–58W range, it can only be operated at up to 50W when installed in the Hero 5.\u003c\/p\u003e\n\n\u003ch3\u003e0.2Ω B Series Boost Coil\u003c\/h3\u003e\n\n\u003cp\u003eThe 0.2Ω option produces a warm, open DTL inhale with high vapour output. It should be used with the airflow open and a low-strength, high-VG e-liquid.\u003c\/p\u003e\n\n\u003cp\u003eBecause the Hero 5 is limited to 50W, this coil should be used at 50W in this device.\u003c\/p\u003e\n\n\u003ch3\u003e0.3Ω B Series Boost Coil\u003c\/h3\u003e\n\n\u003cp\u003eThe 0.3Ω coil operates between 30W and 38W. It offers a DTL vape with substantial vapour production while using less battery power and e-liquid than the 0.2Ω option.\u003c\/p\u003e\n\n\u003ch3\u003e0.4Ω B Series Boost Coil\u003c\/h3\u003e\n\n\u003cp\u003eThe 0.4Ω coil is designed for RDL vaping between 25W and 35W. It provides a balance of warmth, flavour, vapour production and battery life, making it a practical everyday choice for many Hero 5 users.\u003c\/p\u003e\n\n\u003ch3\u003e0.6Ω B Series Boost Coil\u003c\/h3\u003e\n\n\u003cp\u003eThe 0.6Ω coil operates between 15W and 25W and creates a cooler, more restricted vape. Depending on the airflow setting, it can provide either an RDL inhale or a loose MTL draw.\u003c\/p\u003e\n\n\u003ch3\u003e0.8Ω B Series Coil\u003c\/h3\u003e\n\n\u003cp\u003eThe 0.8Ω coil is designed for MTL vaping between 12W and 16W. It produces less vapour than the lower-resistance options and is suitable for 50\/50 e-liquids and nicotine salts.\u003c\/p\u003e\n\n\u003ch3\u003e1.2Ω B Series Coil\u003c\/h3\u003e\n\n\u003cp\u003eThe 1.2Ω coil operates between 8W and 12W and provides the tightest MTL draw available for the pod. It uses less battery power and e-liquid and is the most suitable option for users who prefer stronger nicotine salt e-liquids.\u003c\/p\u003e\n\n\u003ch2\u003eMTL, RDL and DTL Airflow\u003c\/h2\u003e\n\n\u003cp\u003eThe adjustable airflow control is positioned towards the top of the pod. This allows you to change how restricted or open the inhale feels while helping reduce the risk of e-liquid escaping through the bottom of the cartridge.\u003c\/p\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eMTL:\u003c\/strong\u003e Close the airflow and use a 0.8Ω or 1.2Ω coil.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eLoose MTL or RDL:\u003c\/strong\u003e Use a partially open airflow with a 0.4Ω or 0.6Ω coil.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDTL:\u003c\/strong\u003e Open the airflow and use a 0.2Ω or 0.3Ω coil.\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003eThe selected coil is just as important as the airflow position. Closing the airflow will not turn a high-powered 0.2Ω coil into a suitable nicotine salt MTL setup.\u003c\/p\u003e\n\n\u003cp\u003eRead our guides to \u003ca href=\"\/blogs\/guides\/mouth-to-lung-vs-direct-to-lung-vaping\" target=\"_self\"\u003eMTL and DTL vaping\u003c\/a\u003e and \u003ca href=\"\/blogs\/guides\/what-is-rdl-vaping\" target=\"_self\"\u003erestricted direct-to-lung vaping\u003c\/a\u003e for a complete comparison.\u003c\/p\u003e\n\n\u003ch2\u003eTop-Filling Hero 5 Replacement Pod\u003c\/h2\u003e\n\n\u003cp\u003eThe top-filling system allows you to refill the cartridge without removing it from the Aegis Hero 5 device. A silicone stopper seals the filling port between refills.\u003c\/p\u003e\n\n\u003ch3\u003eHow to Fill the Aegis Hero 5 Pod\u003c\/h3\u003e\n\n\u003col\u003e \u003cli\u003ePlace the device upright on a stable surface.\u003c\/li\u003e \u003cli\u003eOpen the silicone filling stopper on the pod.\u003c\/li\u003e \u003cli\u003eInsert the e-liquid bottle nozzle into the filling port.\u003c\/li\u003e \u003cli\u003eFill the cartridge without exceeding its 2ml capacity.\u003c\/li\u003e \u003cli\u003eRemove the bottle nozzle and clean away any excess e-liquid.\u003c\/li\u003e \u003cli\u003eClose the silicone stopper firmly.\u003c\/li\u003e \u003cli\u003eAllow a newly installed coil to stand for five to ten minutes before vaping.\u003c\/li\u003e \u003c\/ol\u003e\n\n\u003cp\u003eDo not place e-liquid into the central airflow opening. Keeping the silicone stopper clean and completely closed will help prevent leaking.\u003c\/p\u003e\n\n\u003ch2\u003eReplaceable Push-Fit Coil Design\u003c\/h2\u003e\n\n\u003cp\u003eThe pod itself does not contain a permanently installed coil. Instead, a separate B Series coil pushes into the opening on the base of the cartridge.\u003c\/p\u003e\n\n\u003cp\u003eWhen flavour or vapour production begins to decline, replace the coil rather than discarding the entire pod. The cartridge only needs replacing if it becomes damaged, cracked, heavily worn or no longer forms a reliable seal.\u003c\/p\u003e\n\n\u003ch3\u003eHow to Install a Geekvape B Series Coil\u003c\/h3\u003e\n\n\u003col\u003e \u003cli\u003eRemove the pod from the Aegis Hero 5 device.\u003c\/li\u003e \u003cli\u003eTake the new B Series coil out of its packaging.\u003c\/li\u003e \u003cli\u003eAdd a few drops of e-liquid to the exposed cotton openings.\u003c\/li\u003e \u003cli\u003eAlign the coil with the opening in the bottom of the pod.\u003c\/li\u003e \u003cli\u003ePush the coil firmly into place until it sits flat.\u003c\/li\u003e \u003cli\u003eFill the pod through its top filling port.\u003c\/li\u003e \u003cli\u003eLeave the filled pod upright for five to ten minutes.\u003c\/li\u003e \u003cli\u003eBegin at the bottom of the coil’s recommended wattage range.\u003c\/li\u003e \u003c\/ol\u003e\n\n\u003cp\u003eCheck that the coil is fully inserted before filling. An incorrectly fitted coil can prevent the pod from sealing properly and may cause leaking.\u003c\/p\u003e\n\n\u003ch2\u003eWhich E-Liquid Should You Use?\u003c\/h2\u003e\n\n\u003cp\u003eThe Aegis Hero 5 pod can support a wide selection of e-liquids because it accepts coils ranging from 0.2Ω to 1.2Ω. The correct liquid depends on the installed coil rather than the pod alone.\u003c\/p\u003e\n\n\u003ch3\u003eUsing 0.2Ω or 0.3Ω Coils\u003c\/h3\u003e\n\n\u003cul\u003e \u003cli\u003eChoose a lower-strength, high-VG e-liquid\u003c\/li\u003e \u003cli\u003eBest suited to \u003ca href=\"\/collections\/shortfills\" target=\"_self\"\u003e70VG shortfills\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003eUse an open airflow setting\u003c\/li\u003e \u003cli\u003eAvoid 10mg and 20mg nicotine salts\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch3\u003eUsing 0.4Ω or 0.6Ω Coils\u003c\/h3\u003e\n\n\u003cul\u003e \u003cli\u003eSuitable for RDL vaping\u003c\/li\u003e \u003cli\u003eUse lower-strength 50\/50 or compatible high-VG e-liquid\u003c\/li\u003e \u003cli\u003eThe 0.6Ω option can use lower-strength nic salts\u003c\/li\u003e \u003cli\u003eAvoid unnecessarily high nicotine strengths\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch3\u003eUsing 0.8Ω or 1.2Ω Coils\u003c\/h3\u003e\n\n\u003cul\u003e \u003cli\u003eBest suited to \u003ca href=\"\/collections\/50-50\" target=\"_self\"\u003e50\/50 e-liquid\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003eCompatible with \u003ca href=\"\/collections\/nic-salts\" target=\"_self\"\u003enicotine salt e-liquids\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003eUse a lower wattage and tighter airflow\u003c\/li\u003e \u003cli\u003eProduces less vapour and uses less e-liquid\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003eAlways follow the wattage range printed on the installed coil. Using excessive power can burn the cotton and shorten the coil’s usable life.\u003c\/p\u003e\n\n\u003ch2\u003eWhen Should You Replace the Hero 5 Pod?\u003c\/h2\u003e\n\n\u003cp\u003eThe replaceable coil normally wears out before the empty pod itself. You can continue using the same cartridge after installing a new coil, provided it remains clean and undamaged.\u003c\/p\u003e\n\n\u003cp\u003eReplace the complete pod when you notice:\u003c\/p\u003e\n\n\u003cul\u003e \u003cli\u003eCracks or physical damage to the cartridge\u003c\/li\u003e \u003cli\u003eA damaged or loose silicone filling stopper\u003c\/li\u003e \u003cli\u003ePersistent leaking after replacing and correctly fitting the coil\u003c\/li\u003e \u003cli\u003eHeavy staining that cannot be cleaned\u003c\/li\u003e \u003cli\u003eA loose connection with the device\u003c\/li\u003e \u003cli\u003eDamaged magnets or contact points\u003c\/li\u003e \u003cli\u003eAirflow control that no longer operates correctly\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003eA small amount of condensation beneath the pod can occur during normal use. Remove the cartridge occasionally and wipe its base and the device contacts with dry tissue.\u003c\/p\u003e\n\n\u003ch2\u003eHow to Clean the Aegis Hero 5 Pod\u003c\/h2\u003e\n\n\u003col\u003e \u003cli\u003eRemove the pod from the device.\u003c\/li\u003e \u003cli\u003eEmpty any remaining e-liquid.\u003c\/li\u003e \u003cli\u003eRemove the installed B Series coil.\u003c\/li\u003e \u003cli\u003eWipe the pod using clean, dry tissue.\u003c\/li\u003e \u003cli\u003eIf rinsing the empty cartridge, use clean water only.\u003c\/li\u003e \u003cli\u003eAllow the pod to dry completely before reinstalling a coil.\u003c\/li\u003e \u003cli\u003eNever rinse or submerge the coil itself.\u003c\/li\u003e \u003c\/ol\u003e\n\n\u003cp\u003eDo not return a wet cartridge to the device. Moisture around the contacts can interfere with coil detection or damage the electronics.\u003c\/p\u003e\n\n\u003ch2\u003eGeekvape Aegis Hero 5 Empty Pod Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eProduct name\u003c\/th\u003e \u003ctd\u003eGeekvape Aegis Hero 5 Empty Replacement Pod\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eProduct type\u003c\/th\u003e \u003ctd\u003eRefillable empty replacement pod\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eCompatible device\u003c\/th\u003e \u003ctd\u003eGeekvape Aegis Hero 5 Pod Vape Kit\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eUK e-liquid capacity\u003c\/th\u003e \u003ctd\u003e2ml TPD\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eCoil system\u003c\/th\u003e \u003ctd\u003eReplaceable push-fit coil\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eCoil compatibility\u003c\/th\u003e \u003ctd\u003eGeekvape B Series\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eSupported resistances\u003c\/th\u003e \u003ctd\u003e0.2Ω, 0.3Ω, 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eFilling method\u003c\/th\u003e \u003ctd\u003eTop fill with silicone stopper\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eAirflow\u003c\/th\u003e \u003ctd\u003eAdjustable top airflow\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eVaping styles\u003c\/th\u003e \u003ctd\u003eMTL, RDL and DTL\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003ePod material\u003c\/th\u003e \u003ctd\u003eTransparent PCTG\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eDevice connection\u003c\/th\u003e \u003ctd\u003eMagnetic\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003eAvailable colours\u003c\/th\u003e \u003ctd\u003eIron Black and Pure White\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003ePack size\u003c\/th\u003e \u003ctd\u003eOne empty pod\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\n\n\u003ch2\u003eGeekvape Aegis Hero 5 Pod Colours\u003c\/h2\u003e\n\n\u003cp\u003eThe replacement cartridge is available in two finishes designed to match different Aegis Hero 5 colour options.\u003c\/p\u003e\n\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eIron Black:\u003c\/strong\u003e Dark pod detailing suited to black and darker Hero 5 finishes\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePure White:\u003c\/strong\u003e White pod detailing suited to the Pure White device and lighter finishes\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003eThe colour selection changes the exterior detailing only. Both versions have the same capacity, filling system, airflow and coil compatibility.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is Included?\u003c\/h2\u003e\n\n\u003cul\u003e \u003cli\u003e1 × Geekvape Aegis Hero 5 Empty Replacement Pod – 2ml TPD\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Geekvape B Series coils, the Aegis Hero 5 device and e-liquid are not included.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Buy the Aegis Hero 5 Empty Pod?\u003c\/h2\u003e\n\n\u003cp\u003eThis pod is intended for existing Aegis Hero 5 owners who need to replace a damaged cartridge or want a spare pod for a different e-liquid or coil resistance.\u003c\/p\u003e\n\n\u003cp\u003eKeeping separate pods for different flavours can prevent strong mint, menthol, aniseed and dessert flavours from mixing. Spare pods are also useful for switching between a high-powered DTL setup and a lower-powered MTL setup without emptying and rebuilding the same cartridge each time.\u003c\/p\u003e\n\n\u003ch2\u003eAbout Geekvape\u003c\/h2\u003e\n\n\u003cp\u003e\u003ca href=\"\/collections\/geek-vape\" target=\"_self\"\u003eGeekvape\u003c\/a\u003e manufactures refillable pod kits, advanced vape devices, tanks and replacement coils. The brand is particularly known for its durable Aegis range and widely compatible coil platforms.\u003c\/p\u003e\n\n\u003cp\u003eThe Hero 5 replacement pod combines the flexibility of the B Series coil range with an easy top-fill design and adjustable airflow.\u003c\/p\u003e","brand":"Geek Vape","offers":[{"title":"Black","offer_id":58434311061891,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":false},{"title":"White","offer_id":58434311094659,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2860\/8220\/files\/geek-vape-aegis-hero-5-iron-black-pod-replacement-pod.webp?v=1783682083","url":"https:\/\/vaping101.co.uk\/products\/geekvape-aegis-hero-5-empty-replacement-pod","provider":"Vaping 101 UK's Number 1","version":"1.0","type":"link"}