Description - Dotmod dotBox 220W V2 Silver Skull Limited Edition Mod

Dotmod dotBox 220W V2 Skull Silver Engraved Mod

Premium Dotmod performance with a distinctive engraved finish. The Dotmod dotBox 220W V2 Skull Silver Engraved Mod combines Dotmod's powerful dual-18650 regulated platform with detailed skull-themed engraving across its silver aluminium chassis.

Designed for experienced vapers who want something more distinctive than a standard box mod, this engraved edition retains the performance of the dotBox 220W V2, including 5W–220W adjustable output, seven operating modes, a clear 1.08-inch colour display, dedicated lock switch and standard 510 connection.

This is the mod-only version. Two suitable high-drain 18650 batteries are required, while a vape tank, coils and e-liquid must be purchased separately.

• Skull Silver engraved finish with detailed artwork across the chassis
• 5W–220W output for a wide range of tanks and coil builds
• Dual 18650 battery configuration
• Seven operating modes including Power, TC, Curve and Boost
• 1.08-inch colour display for clear settings and battery information
• Dedicated lock switch for convenient everyday use
• Standard 510 connection for broad tank, RTA and RDA compatibility
• Premium aluminium construction

Dotmod dotBox 220W V2 Skull Silver Features

Skull Silver Engraved Design

The defining feature of this dotBox 220W V2 is its engraved Skull Silver finish. Detailed skull artwork is applied across the silver aluminium body, creating a striking monochrome appearance that is very different from the standard factory colour options.

The engraving complements the clean industrial styling of the dotBox rather than changing the underlying device. You still get Dotmod's aluminium construction, familiar control layout, colour display and full regulated 220W platform underneath the custom exterior.

For vapers and collectors who prefer more unusual hardware, the Skull Silver version offers the performance of the standard dotBox 220W V2 with a much more distinctive appearance.

Seven Operating Modes

The Dotmod dotBox 220W V2 provides a broad selection of operating modes, making it particularly well suited to experienced users who regularly change tanks, coils or rebuildable setups.

5W–220W Adjustable Power

With an adjustable output range from 5W to 220W, the dotBox V2 can accommodate considerably more setups than a lower-powered single-battery mod.

Lower wattages can be used with suitable tanks and coils, while the upper end of the power range provides the headroom required by demanding sub-ohm tanks and larger rebuildable coil configurations.

Always use the wattage range recommended by your coil manufacturer. When installing a new coil, start towards the lower end of its recommended range and increase the power gradually.

Dual 18650 Battery Performance

The Dotmod dotBox 220W V2 requires two high-drain 18650 batteries. Batteries are not supplied with the device.

For a dual-battery regulated mod, we recommend using a married pair of identical batteries purchased together and kept together throughout their working life. Both cells should be the same brand, model, capacity and age.

Never use a vape battery with damaged insulation, torn wraps or visible physical damage. Loose batteries should always be stored and transported in a suitable protective battery case.

1.08-Inch Colour Display & Lock Switch

The 1.08-inch colour screen provides a clear overview of your current device settings, allowing you to quickly check output, resistance, battery status and operating mode.

A dedicated physical lock switch provides an easy way to secure the controls when the device is not being used or is being carried, helping prevent accidental firing or unwanted setting changes.

Compatible Vape Tanks, RTAs & RDAs

The dotBox 220W V2 uses a standard 510 connection, so you are not restricted to a proprietary tank or pod system.

It can be paired with a wide selection of compatible:

• Sub-ohm vape tanks
• MTL and RDL tanks
• RTAs (Rebuildable Tank Atomisers)
• RDAs (Rebuildable Dripping Atomisers)
• Other compatible 510 atomisers

Your ideal power setting and e-liquid will depend on the tank and coil installed rather than the mod itself.

Which E-Liquid Should I Use?

Because the dotBox 220W V2 is a mod only, the correct e-liquid depends on the tank and coil you pair with it.

For higher-powered sub-ohm tanks and rebuildable setups, a higher-VG e-liquid such as a 70VG shortfill will normally be the most appropriate choice. These setups produce significantly more vapour per puff and are generally used with lower nicotine strengths.

If you fit a suitable lower-powered MTL tank, a thinner 50/50 e-liquid or nicotine salt may be more appropriate. Always follow the recommendations for the specific tank and coil you are using.

Who Is the DotBox 220W V2 Skull Silver For?

The Dotmod dotBox 220W V2 Skull Silver Engraved Mod is aimed primarily at experienced vapers who want a powerful regulated mod with extensive control over their setup and a more unusual finish than a standard factory colour.

• Experienced users looking for a powerful dual-battery mod
• DTL vapers using higher-powered sub-ohm tanks
• RTA and RDA users who want up to 220W available
• Users who want adjustable Curve, Boost and temperature-control modes
• Vapers who prefer removable 18650 batteries
• Collectors looking for distinctive engraved hardware
• Users who prefer the Skull Silver design over standard dotBox finishes

Dotmod dotBox 220W V2 Skull Silver Specifications

How to Use the Dotmod dotBox 220W V2

1. Install two suitable matching high-drain 18650 batteries, observing the polarity markings inside the device.
2. Attach a compatible vape tank, RTA or RDA to the 510 connection.
3. Switch the dotBox on and select the appropriate operating mode.
4. Set the wattage or temperature according to the recommendations for your installed coil.
5. Start at the lower end of the recommended power range when using a new coil and increase gradually.
6. Use the dedicated lock switch before carrying or storing the device.

What's in the Box?

• 1 × Dotmod dotBox 220W V2 Skull Silver Engraved Mod
• 1 × USB Type-C Cable
• 1 × User Manual

Please note: Two suitable 18650 batteries, a vape tank, coils and e-liquid are not included.

About Dotmod

Dotmod is known for premium vaping hardware with a strong focus on build quality, distinctive design and enthusiast-level performance. The dotBox range combines the company's recognisable styling with regulated chipsets and extensive adjustment for users who prefer to build their own tank and mod combinations.

The Skull Silver Engraved dotBox 220W V2 takes that established platform and gives it a considerably more distinctive exterior without compromising the power, functionality or versatility of the underlying device.