Vaporesso GTX One Pro Vape Kit

Description - Vaporesso GTX One Pro Vape Kit

The Vaporesso GTX One Pro is a compact 40W tank-based kit built specifically for MTL (mouth-to-lung) and RDL (restricted direct-lung) vapers. Produced by [Vaporesso](https://vaping101.co.uk/collections/vaporesso), one of the most trusted names in vaping hardware, the GTX One Pro pairs a high-density 3000mAh internal battery with COREX GTX coil technology and a triple leak-resistant tank to deliver consistent, clean flavour across long sessions. It ships with two GTX coils and two drip tips, so you can dial in a tight, cigarette-close MTL draw or loosen things up for a more open RDL hit straight out of the box. Whether you're making the switch from cigarettes or looking for a reliable carry-everywhere daily setup, the GTX One Pro is built to perform all day without fuss.

Available now with fast UK delivery and free shipping on orders over £50.

---

## Introducing the Vaporesso GTX One Pro

The Vaporesso GTX One Pro sits at the crossroads of simplicity and genuine performance. On the outside, it's a compact, palm-friendly kit with a skin-friendly silicone grip and a curved body designed for all-day carry. Inside, the AXON chip and COREX mesh coil technology handle the heavy lifting so you don't have to constantly fidget with settings.

Unlike basic pen-style devices that offer no adjustability, and unlike complex sub-ohm mods that require real technical knowledge, the GTX One Pro occupies a practical middle ground. The AXON Smart Mode reads your installed coil's resistance and sets the wattage automatically, which removes the most common point of confusion for anyone stepping up from a disposable or a starter kit for the first time.

The XTank T uses top-fill and top-airflow design, backed by SSS Leak-Resistant engineering, to keep refills clean and pockets dry. Adjust airflow from the top ring, fill from the top cap, and the device handles the rest. It's a kit built around removing friction from the vaping experience rather than adding features for their own sake.

---

## Why Choose the Vaporesso GTX One Pro?

The GTX One Pro is a well-rounded kit, but it's particularly strong for three types of vapers: switchers moving from cigarettes or disposables, everyday vapers wanting a reliable and portable daily setup, and anyone upgrading from a basic pen-style device who wants more control without a steep learning curve.

Here's a full breakdown of what you're getting:

- **Device type:** Tank-based all-in-one mod kit. The mod body uses a standard 510 connection, so it accepts the included XTank T and a wide range of alternative tanks.

- **Battery:** 3000mAh built-in high-density cell. Up to 3 days of typical MTL use per charge (Vaporesso lab data). Charges via USB-C at 5V/2A in approximately 90 minutes.

- **Power range:** Adjustable 5-40W with AXON Pulse Mode, which maintains consistent output from the first puff to the last. This prevents the weak-hit fade that fixed-output devices commonly produce near the end of a charge.

- **Smart Mode:** The AXON chip detects the resistance of the installed coil and sets the optimal wattage automatically. No manual adjustment required if you prefer a simple, press-and-go experience.

- **Airflow:** Visualised top airflow ring with precise, stepless adjustment. Dial between a tight MTL draw and a looser RDL hit entirely from the top of the tank, with no need to disassemble.

- **Filling:** Top-fill design with a screw-off cap. No inverted filling, no drip-tip flooding.

- **Leak protection:** SSS Leak-Resistant engineering combined with top airflow significantly reduces e-liquid escape into pockets or bags during daily use.

- **Display:** 0.87-inch OLED showing mode, wattage, resistance, battery level, puff counter, lock status, and SMART on/off. 26% larger than the original GTX One screen.

- **Draw style:** MTL and RDL. Not suited for direct-lung or high-wattage sub-ohm vaping.

- **Build options:** Skin-friendly silicone grip in Pink or Blue; premium PU leather finish in Black, Silver, Brown, or Red. Anti-slip silicone base pad included on all variants.

- **Compliance:** 2ml TPD-compliant tank capacity, in line with UK Tobacco and Related Products Regulations (TRPR).

The combination of AXON Smart Mode automation and hands-on variable wattage makes the GTX One Pro one of the most accessible mod kits available. You can run it entirely on autopilot, or take manual control the moment you want more precision.

---

## Compatibility and Performance

Getting the most from the Vaporesso GTX One Pro means pairing the right coil with the right draw style and e-liquid. The kit ships with two coils already included, but four GTX resistances are compatible in total.

### Coil Compatibility

| Coil | Wattage Range | Best Wattage | Draw Style |

|---|---|---|---|

| GTX 0.4Ω Mesh | 26-32W | 30W | RDL |

| GTX 0.6Ω Mesh | 20-26W | 24W | RDL - pre-installed |

| GTX 0.8Ω Mesh | 12-16W | 16W | MTL |

| GTX 1.2Ω Mesh | 8-12W | 11W | MTL - included in kit |

**Important:** Lower-resistance GTX coils at 0.15Ω and 0.3Ω are not compatible with this kit. They require wattage above the device's 40W maximum output and will not perform correctly.

### E-Liquid Pairing

Choosing the right e-liquid for your coil matters more than most product pages acknowledge. The wrong combination wastes e-liquid, kills coils early, and gives a poor vaping experience.

- **MTL coils (0.8Ω and 1.2Ω):** Use [nic salts](https://vaping101.co.uk/collections/nic-salts) at 10mg or 20mg, or 50/50 freebase e-liquids. Nic salts are formulated for lower-wattage, higher-resistance setups and deliver a noticeably smoother throat hit at higher nicotine strengths compared to standard freebase. The UK legal maximum for nicotine-containing e-liquid is 20mg, so 20mg nic salts are the strongest option available for MTL vaping.

- **RDL coils (0.4Ω and 0.6Ω):** Stick to 50/50 or slightly higher VG blends, up to around 60% VG. High-VG shortfills are not well suited to the 2ml XTank T at these wattages and will not wick efficiently through the coil cotton.

### Flavour Technology

COREX heating combines a Morph-Mesh structure with Micro-fiber Cumulus Cotton for rapid, even heat distribution across the coil surface. Vaporesso claim up to 50% improved vapour efficiency versus standard coil builds (Vaporesso lab data), which translates to brighter, more accurate flavour and a longer coil lifespan before flavour degrades.

### Charging

USB-C at 5V/2A, with a full charge from empty taking approximately 90 minutes.

### A Quick Note on Priming

Before firing a new coil for the first time, prime it. Add a few drops of e-liquid directly onto the exposed cotton wicking ports on the side of the coil body, fill the tank, then leave it for five minutes before your first puff. This saturates the cotton fully before heat is applied, which prevents dry hits and extends the coil's working life significantly. It's a 10-minute habit that saves you money on coils over time.

Browse [Vaporesso coils](https://vaping101.co.uk/collections/vaporesso-coils) to keep a stock of GTX replacements on hand.

---

## Vaporesso GTX One Pro Highlights

The GTX One Pro earns its place as a practical, carry-everywhere kit through intelligent engineering and daily-use practicality rather than headline specs alone.

- **3000mAh battery** with up to 3 days of typical MTL use per charge, 50% longer than the original GTX One

- **AXON Pulse Mode** for consistent output throughout the full charge cycle, not just at the start

- **COREX Morph-Mesh technology** with Micro-fiber Cumulus Cotton for cleaner flavour and extended coil longevity

- **Triple leak protection** via top airflow, top-fill design, and SSS Leak-Resistant barriers

- **Precision top airflow ring** for smooth, stepless adjustment between tight MTL and looser RDL draws

- **0.87-inch OLED display** with seven readouts and simple one-handed navigation, 26% larger than the previous GTX One screen

- **Compact, pocket-friendly body** with a curved profile and skin-friendly grip material across all six colourways

- **510 connection** on the mod body, giving flexibility to use alternative tanks within the 5-40W output range

Together, these features make the GTX One Pro a kit you can rely on from morning to night without constant adjustment, refilling anxiety, or battery anxiety cutting your day short.

---

## Box Contents

Everything you need to start vaping straight away is included.

- 1 x Vaporesso GTX One Pro mod

- 1 x Vaporesso XTank T (top-fill, top-airflow, 2ml capacity)

- 1 x GTX 0.6Ω Mesh coil (pre-installed, RDL)

- 1 x GTX 1.2Ω Mesh coil (MTL, for a tighter, cigarette-close draw)

- 1 x Wide-bore RDL drip tip (pre-fitted to tank)

- 1 x Narrow-bore MTL drip tip

- 1 x USB-C charging cable

- 1 x Spare parts pack (O-rings, refilling silicone plug, spare glass)

- 1 x User manual and warranty card

The GTX One Pro is available now with fast, tracked UK delivery. Orders placed before 2:30pm Monday to Friday are dispatched the same day, with next-day courier options from £3.50 and free shipping on orders over £50. Returns are accepted within 14 days on unused, undamaged items.

Vaping 101 stocks the complete [Vaporesso range](https://vaping101.co.uk/collections/vaporesso), including GTX replacement coils and compatible e-liquids, all in one place. If you're stepping up from a basic pen kit or making the move away from disposables, the GTX One Pro is the kit to do it with.

---

## Frequently Asked Questions

### What coils are compatible with the Vaporesso GTX One Pro?

The GTX One Pro works with GTX coils at 0.4Ω, 0.6Ω, 0.8Ω, and 1.2Ω. Lower-resistance GTX coils at 0.15Ω and 0.3Ω are not compatible because they require wattage above the device's 40W maximum. The kit ships with the 0.6Ω RDL coil pre-installed and a 1.2Ω MTL coil for a tighter draw.

### What e-liquid should I use with the GTX One Pro?

For MTL coils (0.8Ω and 1.2Ω), use nic salts at 10mg or 20mg, or 50/50 freebase liquids. For RDL coils (0.4Ω and 0.6Ω), use a 50/50 or light higher-VG blend. High-VG shortfills are not recommended for this tank at its 2ml capacity and lower wattage range.

### How does Smart Mode work on the GTX One Pro?

Smart Mode is the default setting when you power on the device. The AXON chip reads the resistance of the installed coil and automatically sets the wattage to the recommended output for that coil. No manual configuration is needed. To adjust output yourself, switch to Variable Wattage mode via the menu (3 clicks to open) and set your preferred wattage between 5-40W.

### Is the Vaporesso GTX One Pro suitable for switching from cigarettes?

It's a strong option for switchers. Use the included 1.2Ω MTL coil with the narrow-bore drip tip for the tightest, most cigarette-like draw. Pair it with a 20mg nic salt (the UK legal maximum for nicotine-containing e-liquid) for a satisfying nicotine hit without a harsh throat sensation. Browse our [nic salts range](https://vaping101.co.uk/collections/nic-salts) to find the right liquid to start with.

### How long does the battery last on the GTX One Pro?

Vaporesso's own lab testing indicates up to 3 days of typical MTL use from the 3000mAh cell, which is 50% longer than the original GTX One. Real-world duration depends on how often you vape and at what wattage. A full charge via USB-C takes approximately 90 minutes.

### Can I use the GTX One Pro mod body with other tanks?

Yes. The mod body has a standard 510 connection and accepts most tanks whose coils operate within the 5-40W output range. This is useful if you already own GTX platform tanks or want to explore other [mouth-to-lung tanks](https://vaping101.co.uk/collections/mouth-to-lung-tanks) alongside your existing setup.