Aspire Magnum Replacement Pods

Description - Aspire Magnum Replacement Pods

The Aspire Magnum Replacement Pods are refillable pod cartridges built exclusively for the Aspire Magnum Pod Kit, available from our full Aspire collection. Each pod is constructed from clear PCTG plastic and holds a TPD-compliant 2ml of e-liquid, with a built-in mesh coil that heats rapidly and delivers strong, consistent flavour. Filling is handled through a side-fill port, keeping top-ups clean and quick. The range comes in two resistance options: 0.25Ω for a loose DTL (direct-to-lung) draw and 0.4Ω for a controlled RDL (restricted direct-to-lung) draw. Both pair best with shortfills or high-VG liquids. Each pack contains 2 pods, so you can keep a spare ready before your current one starts to fade.

These are the correct official replacements for anyone running an Aspire Magnum Kit and wanting to maintain consistent performance without degraded flavour or leaking.

Introducing the Aspire Magnum Replacement Pods

Replacing your pod at the right time is what keeps your Aspire Magnum performing the way it should. These refillable pod cartridges slot directly into the Magnum Kit via a magnetic connection, snap in securely, and get you back to vaping in seconds. There is no separate coil to prime or swap out. The coil is integrated into the pod itself, so you replace everything in one clean step.

The transparent PCTG casing means you can check your e-liquid level at a glance without pulling the pod out. The side-fill port makes topping up straightforward, with less mess than bottom-fill designs. At 2ml, the capacity sits within UK TPD regulations, which cap refillable pod volume at 2ml for nicotine-containing e-liquids.

Both the 0.25Ω and 0.4Ω options use an integrated mesh coil. Mesh heats faster and more evenly than traditional wire coils, which translates to quicker ramp-up times, bolder flavour and a more consistent hit from the first draw to the last drop.

Why Choose the Aspire Magnum Replacement Pods?

• Device style: Refillable replacement pod cartridges with an integrated mesh coil

• Compatible device: Aspire Magnum Pod Kit only

• Pod capacity: 2ml (TPD compliant)

• Coil type: Built-in mesh coil for fast ramp-up, bold flavour and efficient vapour production

• Resistance options:

• 0.25Ω - DTL draw, recommended wattage 35-40W, delivers warmer hits and larger clouds

• 0.4Ω - RDL draw, recommended wattage 20-25W, delivers richer flavour and a cooler, smoother draw

• Fill system: Side-fill port for quick, low-mess refills

• Connection: Magnetic fit for a secure, rattle-free seat in the device

• Build material: Transparent PCTG so you can monitor e-liquid levels at a glance

• Best e-liquid pairing: High-VG (70% VG or higher) for coil longevity and clean flavour

• Best for: Everyday vapers and enthusiasts running the Aspire Magnum who want reliable, consistent replacements

With two resistance options available, you can choose your preferred draw style without swapping kits or buying additional hardware.

Compatibility and Performance

These pods are designed exclusively for the Aspire Magnum Pod Kit. They will not fit other Aspire devices such as the Gotek or Flexus range, so it is worth confirming you have the correct kit before ordering.

Resistance and wattage at a glance:

• 0.25Ω (DTL): Recommended wattage 35-40W. Produces a loose, airy draw with warmer vapour and denser clouds.

• 0.4Ω (RDL): Recommended wattage 20-25W. Delivers a more controlled draw with richer flavour and a cooler, smoother hit.

Getting your wattage in the right range for whichever pod you choose makes a real difference. Running too low can cause muted flavour and poor wicking. Running too high shortens pod life and risks a burnt taste.

E-liquid compatibility is just as important as wattage. High-VG e-liquids with a 70% VG ratio or higher are the correct pairing for both resistance options. Thinner 50/50 liquids are too runny for the mesh coil at these power levels and can flood it, shortening pod lifespan noticeably. Browse high-VG shortfills for options that work well with this kit.

On nicotine: freebase e-liquids at 0mg, 3mg or 6mg suit these pods well. High-strength nic salts are not a good match here. Nic salts are formulated for low-wattage pod systems and deliver a smooth hit at lower power. At the wattages the Magnum pods operate, the warmer, denser vapour can make high-strength nic salts feel uncomfortably harsh.

• Pod capacity: 2ml (TPD compliant)

• Pod construction: PCTG, transparent for real-time e-liquid monitoring

• Connection: Magnetic click-fit into the Magnum device

• Output style: Fast ramp-up, dense vapour, flavour-forward mesh performance

Aspire Magnum Replacement Pods - Key Highlights

These pods are built to keep your Aspire Magnum performing the way it should between refills. Here is what makes them stand out:

• 2ml refillable capacity that is fully TPD compliant

• Integrated mesh coil for rapid heat-up and punchy, consistent flavour

• Two resistance options - 0.25Ω DTL and 0.4Ω RDL - to match your preferred draw style

• Side-fill port for quick, clean top-ups with minimal fuss

• Magnetic connection for a secure, leak-resistant fit in the device

• Clear PCTG construction to monitor levels without removing the pod

• Sold in a 2-pack so you always have a spare when your current pod starts to fade

Keeping a spare pack on hand means you can swap quickly when flavour drops off, rather than waiting on a delivery mid-week.

When Should You Replace Your Aspire Magnum Pod?

Knowing when to swap is just as important as having a replacement ready. The mesh coil inside each pod degrades gradually with use, and catching it early prevents a poor vaping experience.

Watch for these signs:

• Muted or dull flavour - one of the first indicators the mesh coil is wearing out

• A dry or burnt taste - the coil is no longer wicking efficiently and needs replacing immediately

• Gurgling or spitting liquid - can indicate a flooded or degraded coil

• Visible discolouration inside the pod - residue build-up affecting flavour quality

• Reduced vapour production at your usual wattage setting

For a moderate user vaping throughout the day, a pod typically lasts between 5 and 10 days. Heavier use or sweeter e-liquids, which caramelise on the coil faster, will shorten that lifespan. If you are using a dessert or candy profile and getting through pods quickly, switching to a fruit or menthol shortfill often extends things considerably.