Voopoo Drag X3 Vape Pod Kit

Description - Voopoo Drag X3 Vape Pod Kit

The Voopoo Drag X3 is an 80W external-battery pod mod built for vapers who want genuine flexibility without the bulk of a full box mod. Running on a single 18650 or 21700 cell, it pairs the portability of a pod system with adjustable power, a proper touchscreen, and the full PnP X coil platform covering tight MTL draws through to open DTL lung hits. It's the natural step up from a basic pod kit or disposable, and a practical downsize from a larger sub-ohm setup. All Voopoo Drag X3 kits sold at Vaping 101 are fully TPD-compliant, and we offer fast UK delivery with next-day options available.

Introducing the Voopoo Drag X3

Powered by the Gene.TT 2.0 chipset, the Drag X3 brings smart, responsive performance to a compact frame. The chipset handles coil detection automatically in Smart Mode, sets appropriate wattage for you, and keeps firing accurate across the full 0.1 to 3.0 ohm resistance range. That matters whether you're running a 0.15 ohm coil at 80W for dense DTL clouds or dialling it back to 0.6 ohm at low wattage for a tight, cigarette-like MTL draw.

The 1.66-inch HD colour touchscreen and capacitive unlock sensor keep controls accessible without fumbling through menus. Tap to lock, tap to adjust. Battery choice is yours: an 18650 keeps the device lighter for everyday carry, while a 21700 cell extends your sessions considerably. Neither is included, so you'll need to pick one up separately.

Voopoo has built a strong reputation for chipset quality and coil platform consistency, and the Drag X3 is a confident addition to the Drag line. It's well-suited to everyday vapers stepping up from entry-level hardware, and experienced users who want a reliable, compact mod for daily use.

Why Choose the Voopoo Drag X3?

The Drag X3 stands out at its price point because it genuinely does more than its size suggests. Here's what you're getting:

• Device type: Pod mod, 80W, with the portability of a pod kit and the adjustable power of a mod
• Battery: Single 18650 or 21700 external cell (not included). An 18650 keeps the setup lighter; a 21700 gives you more capacity for longer sessions. Browse our 18650 batteries and 21700 batteries
• Power range: 5 to 80W, compatible with resistances from 0.1 to 3.0 ohm
• Chipset: Gene.TT 2.0 with three modes: Smart Mode (auto-detects coil and sets wattage), RBA Mode (fully manual wattage control), and ECO Mode (reduces output to conserve battery and e-liquid)
• Display: 1.66-inch HD colour touchscreen with capacitive unlock, fast and secure to navigate
• Vaping styles: Full MTL-to-DTL range supported. MTL (mouth-to-lung) means a tighter, cigarette-like draw; DTL (direct-to-lung) is a more open, airy inhale with denser vapour. Different pod cartridges are needed for each style
• Coil platform: PnP X, featuring a 4-layer leak-resistant pod design with mesh-distributed heating for consistent flavour delivery
• Charging: USB-C 5V/2A with passthrough charging, cable included
• Build: Zinc alloy frame with a leather panel finish, durable and comfortable for daily carry
• Best for: Everyday vapers and those upgrading from basic pods, disposables, or downsizing from bulkier sub-ohm kits who want more control without added complexity

For most users starting out on the Drag X3, Smart Mode is the right place to begin. It takes the guesswork out of wattage and lets the chipset do the matching for you.

Compatibility and Performance

Getting the most from the Voopoo Drag X3 Vape Pod Kit comes down to matching the right coil and pod to your preferred draw style.

Coils: The kit ships with two PnP X coils, both compatible with the included DTL pod cartridge:

• 0.15 ohm (pre-installed, DTL, best at 60-80W for a full, open draw with dense vapour)
• 0.3 ohm (spare, RDL to light MTL, best at 32-40W for a slightly tighter, more relaxed draw)

Additional coils are available separately via the full Voopoo PnP X coil range, including 0.2 ohm, 0.45 ohm, and 0.6 ohm options. The lower the resistance, the more power it needs and the more vapour it produces. Higher-resistance coils run at lower wattages and suit MTL vaping.

Pods: The included pod is the PnP X DTL cartridge, holding 2ml in line with UK TPD regulations. A 5ml version exists in some markets, but UK customers receive the 2ml version. The pod uses a side-fill port for clean, mess-free refilling and features top airflow to keep condensation away from the battery compartment.

For MTL vaping, you'll need a separate MTL pod cartridge, available from our Voopoo pods range. Pair it with a 0.45 ohm or 0.6 ohm coil at 5-23W for the tightest, most cigarette-like draw the platform offers.

E-liquid compatibility:

• DTL setup (0.15 ohm, 60-80W): Use 50-70% VG e-liquids. Shortfills and high-VG e-liquids are the correct choice here. Thinner, high-PG liquids will cause dry hits at these wattages
• MTL setup (0.3 ohm or higher, lower wattage): 50/50 freebase e-liquids and nic salts both work well
• Avoid: High-strength nic salts (20mg) with the DTL setup at high wattage. Nic salts are formulated for low-wattage pod systems and are not suited to sub-ohm, high-power DTL coils. Save them for the MTL configuration

Before you fire up a new coil for the first time, prime it. Skipping this step with a fresh 0.15 ohm coil can cause immediate burn damage. Follow our coil priming guide to avoid an expensive mistake.

Voopoo Drag X3 Highlights

A pod mod earns daily carry status when every component works together consistently. The Drag X3 does exactly that.

• External battery flexibility: swap between 18650 and 21700 depending on your day, no fixed internal cell to run flat at a bad time
• Gene.TT 2.0 chipset: accurate firing, intelligent coil detection, and three modes that suit beginners and experienced users alike
• 1.66-inch HD touchscreen with capacitive unlock: precise control in seconds, no scrolling through settings blindly
• Full MTL-to-DTL range: one device handles both draw styles with the right pod and coil pairing
• 4-layer leak-resistant PnP X pod: top-airflow construction keeps the battery compartment dry and the flavour clean
• USB-C 5V/2A with passthrough charging: compatible with cables you already own, and you can vape while it charges
• Zinc alloy and leather build: solid in the hand, resistant to daily wear, and noticeably premium at the price

The combination of chipset intelligence, pod quality, and battery choice puts the Drag X3 ahead of most rivals in the 80W pod mod category.

What's in the Box

Every Voopoo Drag X3 kit ships with everything needed to start vaping, with one exception: the battery. Here's the full contents:

• 1 x Voopoo Drag X3 device
• 1 x PnP X DTL pod cartridge (2ml, TPD-compliant UK version)
• 1 x PnP X 0.15 ohm coil (pre-installed in the pod)
• 1 x PnP X 0.3 ohm coil (spare)
• 1 x PnP X Platform Card (a reference guide to the full PnP X coil range, including recommended wattage settings for each coil - useful to keep)
• 1 x USB Type-C cable
• 1 x user manual

You will need a battery before you can use the device. A single 18650 or 21700 cell is required. Always use authentic, undamaged batteries from a reputable brand. Browse our full range of 18650 batteries and 21700 batteries to find the right option.

E-Liquid Guide for the Voopoo Drag X3

The correct e-liquid depends on which coil and pod you're running. Here's a straightforward guide matched to your daily smoking history.

Running DTL (0.15 ohm coil, 60-80W, included DTL pod):

Running MTL (0.3 ohm or higher resistance coil, MTL pod cartridge sold separately):

Nic salts are nicotine salt e-liquids designed for lower-wattage pod systems. They deliver a smoother throat hit at higher nicotine strengths compared to freebase, making them the right choice for MTL setups. The UK legal maximum nicotine strength is 20mg. Not sure which type suits you? Browse nic salts by strength.