Welcome to the ultimate guide on using your OXVA XLIM PRO 2 DNA with Evolv's Escribe Software. Whether you're just getting started or you're an advanced user looking to fine-tune performance, this step-by-step tutorial will walk you through installation, setup, and full customization of your device.
🔧 Step 1: Install Escribe Software
Before doing anything, make sure you have the latest version of the Escribe software. You can download it from:
-
EVOLV Official: https://www.evolvapor.com/escribe
-
OXVA Official: https://www.oxva.com/pages/xlim-pro-2-dna
💡 Tip: Always choose the version that matches your operating system for the best compatibility.
🔌 Step 2: Connect Your Device
Use the USB cable that comes with your XLIM PRO 2 DNA to connect it to your PC. Ensure that the cable supports data transfer (not just charging).
Once connected, the device should be recognized by the Escribe software automatically.
🖥️ Step 3: Explore the Escribe Interface
Upon successful connection, you'll see various tabs in the Escribe software. Each tab allows you to customize different aspects of your device. Here's a breakdown:
⚙️ 3.1 General Settings
Set:
-
Power output
-
Boost level (initial power burst)
-
Warmth per coil resistance
⚠️ Only adjust wattage within your pod's safe range.
🔒 3.2 Safety Settings
Configure:
-
Max puff duration (recommended: 7–10 seconds)
-
Button lock types
-
Auto-lock time to avoid accidental firing
💡 3.3 Display Settings
Adjust:
-
Brightness
-
Screen timeout
-
Auto-dim features
🟢 Lower brightness helps conserve battery life.
🎨 3.4 Theme & Colour Schemes
Customize:
-
Fonts
-
Error icons
-
LED animations
✅ Keep it simple for better readability and performance.
🌐 3.5 Language Settings
Edit display messages like:
-
“No Atomizer”
-
“Low Battery”
Great for branding or multilingual support.
🔬 3.6 Research
Advanced users can:
-
Set puff count limits
-
Cap energy usage
-
Enable time-based vaping control
⚠️ Leave off unless you're running tests.
📊 3.7 Device Monitor
Track real-time data:
-
Voltage
-
Resistance
-
Puff duration
-
Charging behavior
Click “Record” to log data during sessions.
💾 Step 3.8: Save & Apply Settings
After customization, you need to sync your changes:
-
Click “Connect and Download Settings” to pull in the current setup.
-
Make your edits.
-
Click “Upload Settings to Device” to apply them.
❗ Skipping this will result in your changes not taking effect on the device.
🔁 Step 4: Restore or Reset Settings
If something goes wrong or you just want a clean slate:
-
Go to the General tab and click “Restore Defaults” to reset all settings.
-
Do not confuse this with “Reset Statistics” in the Research tab, which only clears usage data.
❓ Need Help?
If you experience any issues:
- 📞 Phone: 01224 032542
- 🌐 Web: www.oxva.com or www.evolvapor.com
- 💬 Help Center: Accessible directly in the Escribe software under the Help tab
- ❓ Vaping 101 Help: Our team at Vaping 101 is fully trained on the new software and ready to assist you. Contact us anytime at info@vaping101.co.uk.
We're here to ensure your OXVA XLIM PRO 2 DNA delivers the best vaping experience possible.
