Dotmod dotBox 220W V2 Gunmetal Engraved Attack on Titan Limited Edition Mod

Description - Dotmod dotBox 220W V2 Gunmetal Engraved Attack on Titan Limited Edition Mod

The Dotmod dotBox 220W V2 Gunmetal Engraved Attack on Titan Limited Edition Mod combines the advanced performance of the dotBox V2 with a detailed Attack on Titan-themed engraved finish. Designed for experienced vapers and collectors, it delivers an adjustable output of 5W to 220W, seven operating modes and compatibility with a wide range of standard 510 vape tanks and rebuildable atomisers.

The lightweight gunmetal aluminium chassis features intricate engraved artwork inspired by Attack on Titan, giving this version a bold and collectable appearance while retaining the comfortable shape, premium construction and advanced controls of the standard dotBox 220W V2.

This is the mod-only version, so no tank, batteries, coils or e-liquid are included. It requires two high-drain 18650 batteries and is best suited to users who understand removable battery safety, coil resistance and wattage selection.

Introducing the Dotmod dotBox 220W V2 Attack on Titan Mod

The Dotmod dotBox 220W V2 Gunmetal Engraved Attack on Titan Limited Edition Mod is built around a lightweight aluminium chassis with detailed engraved artwork across its exterior panels.

The dark gunmetal colourway complements the dramatic engraved design, creating a more distinctive alternative to the standard dotBox V2 finishes. The artwork does not affect the device's controls or performance, allowing users to enjoy the complete 5W to 220W power range and all seven operating modes.

A crisp 1.08-inch full-colour display clearly shows the selected wattage, coil resistance, battery status and operating mode. The display interface can also be customised through the device menu.

A dedicated physical lock switch allows the entire mod to be disabled before it is placed in a pocket, bag or storage case, helping to prevent accidental activation.

Dotmod dotBox 220W V2 Attack on Titan Mod Features

• Attack on Titan limited-edition design: Detailed engraved artwork across a premium gunmetal aluminium chassis
• Device type: Standalone regulated box mod with no tank included
• Power output: Adjustable from 5W to 220W
• Battery configuration: Requires 2 x high-drain 18650 batteries
• Operating modes: Power, Bypass, Nickel TC, Titanium TC, Stainless Steel TC, Curve and Boost
• Display: 1.08-inch full-colour screen
• Connection: Standard centred 510 connection
• Recommended tank size: Atomisers measuring up to approximately 25mm provide the cleanest fit
• Construction: Lightweight aluminium alloy body
• Controls: Dedicated full-device lock switch
• Charging: USB-C charging connection
• Resistance range: Approximately 0.08 to 3.0 ohm
• Safety features: Short-circuit protection, resistance warnings and a 10-second firing cut-off

Gunmetal Engraved Attack on Titan Design

This limited-edition dotBox features detailed Attack on Titan-themed engraving across its gunmetal aluminium body. The monochrome artwork works naturally with the darker finish, giving the mod a dramatic appearance without affecting its everyday usability.

The engraving is applied across the exterior panels while leaving the screen, buttons, battery compartment, 510 connection and physical locking switch fully accessible.

This version is particularly suited to collectors, fans of Attack on Titan and vapers who want their hardware to look different from a standard factory colourway.

Unless licensing has been confirmed by Dotmod or the supplier, the product should not be described as an official Attack on Titan collaboration or an officially licensed edition.

Dotmod dotBox 220W V2 Attack on Titan Performance

With an adjustable output of 5W to 220W, the dotBox V2 supports a broad range of tanks, coils and vaping styles. It can power moderate-wattage RDL tanks, high-powered sub-ohm tanks and demanding rebuildable atomisers.

Always follow the recommended wattage range printed on the installed coil. Start near the bottom of the range and increase the power gradually until you achieve your preferred balance of flavour, warmth and vapour production.

Power Mode

Power mode provides straightforward adjustable-wattage vaping and is the most suitable option for most pre-built vape coils and sub-ohm tanks.

Boost Mode

Boost mode increases the initial power delivered when the fire button is pressed. This helps larger coils heat more quickly and can provide a stronger response at the beginning of each puff.

Curve Mode

Curve mode allows you to customise how the wattage changes throughout each puff. It can be used to create a faster initial ramp-up, a smoother heating profile or a gradual reduction in power.

Temperature Control Modes

Nickel, titanium and stainless steel temperature-control modes regulate the temperature of compatible coil wire. Each setting must only be used with the corresponding supported wire type.

Bypass Mode

Bypass mode provides an output based on the current voltage of the installed batteries. This creates a more direct style of power delivery while continuing to operate through the mod's regulated chipset and safety protections.

Tank and Atomiser Compatibility

The Dotmod dotBox 220W V2 Attack on Titan Limited Edition Mod uses a standard centred 510 connection and works with most compatible vape tanks, RDAs and RTAs.

Atomisers measuring approximately 25mm wide will provide the cleanest fit on top of the device without noticeable overhang.

You can pair it with a compatible Dotmod tank or browse our wider hardware collections:

• Sub-ohm vape tanks
• Rebuildable atomisers
• Box mods
• Dotmod vape hardware

The mod can technically be used with MTL, RDL and DTL atomisers, provided the coil falls within the supported resistance and wattage range. However, its dual-battery configuration and advanced menu system make it most naturally suited to experienced RDL and DTL users.

Choosing the Right Wattage and E-Liquid

The correct wattage depends on the coil fitted inside your tank rather than the maximum output available from the mod.

• MTL coils: Use the lower wattage stated by the manufacturer and pair them with a compatible 50/50 e-liquid.
• RDL coils: Usually operate at moderate wattages and may work with 50/50 or higher-VG liquids depending on their design.
• DTL and sub-ohm coils: Usually require higher wattages and thicker high-VG e-liquid.
• Rebuildable coils: Only suitable for users who understand coil building, resistance testing and battery safety.

Read our guide explaining what wattage you should vape at or learn more in our guide to RDL vaping.

For compatible liquids, browse our high-VG e-liquids and shortfill e-liquid collection.

Dotmod dotBox 220W V2 Battery Requirements

The Dotmod dotBox 220W V2 requires two matching high-drain 18650 batteries. Batteries are sold separately and are not included with the mod.

Both batteries should be the same brand, model, capacity, age and condition. Purchase the cells together and keep them as a married pair, charging and discharging both batteries together throughout their usable life.

Do not combine batteries with different specifications or mix a new battery with an older cell. Always inspect the battery wraps and top insulators before use.

Higher wattage settings place greater demand on the batteries, so the cells must have an appropriate continuous discharge rating for your intended power level.

Shop compatible 18650 batteries and read our vape battery safety guide before using an external-battery mod.

Charging the Dotmod dotBox 220W V2

A USB-C cable is included for convenient in-device charging and occasional top-ups. For routine charging, a dedicated external battery charger is generally preferred for dual-18650 devices.

An external charger allows both batteries to be monitored and charged independently while helping users keep the cells together as a matched pair.

Never charge damaged batteries or cells with torn wraps. Batteries should not be left charging unattended, and loose 18650 cells must always be transported in a protective battery case.

Browse our range of compatible vape battery chargers.

How to Use the Dotmod dotBox 220W V2 Attack on Titan Mod

1. Inspect two matching 18650 batteries for damaged wraps or insulators.
2. Insert both batteries using the correct orientation marked inside the battery compartment.
3. Attach a compatible 510 vape tank without overtightening the connection.
4. Switch the device on using the button sequence shown in the included manual.
5. Select Power mode for standard adjustable-wattage vaping.
6. Set the mod to the lowest recommended wattage printed on the installed coil.
7. Increase the power gradually until you reach your preferred vape.
8. Use the physical lock switch whenever the device is being carried or stored.

Refer to the supplied Dotmod user manual for detailed button combinations, menu navigation and advanced chipset settings.

Who Is the Dotmod Attack on Titan Limited Edition Mod For?

The Dotmod dotBox 220W V2 Attack on Titan Mod is best suited to:

• Experienced vapers looking for a premium dual-18650 mod
• Collectors looking for limited-edition engraved vape hardware
• Attack on Titan fans who want a distinctive box mod
• Users who already own a compatible 510 tank or rebuildable atomiser
• RDL and DTL vapers who require adjustable high-wattage output
• Users who want Curve, Boost or temperature-control settings
• Vapers who prefer replaceable batteries instead of a permanently built-in cell

It may not be suitable for complete beginners, users looking for a compact pod system or anyone unfamiliar with removable battery safety.

This is not a complete vape kit because no tank, batteries, coils or e-liquid are included.

About Dotmod

Dotmod is known for premium vape hardware combining distinctive styling, lightweight materials and advanced chipset controls. Its product range includes box mods, vape tanks, rebuildable atomisers and compact devices.

The dotBox range is designed for users who value refined construction and precise control over power delivery and coil performance.

Browse the complete Dotmod collection at Vaping101.

What's in the Box?

• 1 x Dotmod dotBox 220W V2 Gunmetal Engraved Attack on Titan Limited Edition Mod
• 1 x USB-C cable
• 1 x User manual

Please note: Two 18650 batteries, a vape tank, coils and e-liquid are not included.